Ironworker machines

REBEL series ironworker machines have a capacity of 45 – 190 tons. These machines are made with high end components that are well know and are easily available within the North American Market. The hydraulic ironworker machines have 4 or 5 work stations for metalworking needs like punching, cutting shearing and notching.

How to work the ironworker machines

Ironworkers are multi-purpose machines for metal bending and cutting. Our ironworkers have 5 work stations.

1. Punching station

All metal punching operations are processed by means of hydraulic power, thus giving the machine the ability to punch very efficiently and silently. The machine can either be used to punch thick metal or thin materials layered together. Punching is silent, powerful, and efficient. The waste materials come off together and in layers. The punching table consists of two parts: the first is the punching flange; the second is the holder. The holder is a device that prevents the material from coming back with the punch after cutting. There are different holders for different materials.

2. Profile cutting station

The metal shear station has been equipped with simple and sturdy fixing mechanisms that can be adjusted for any steel thickness depending on the cutting capacity of the machine. The shearing capacity can go up to 17.71 inches in the flat bar or the cutting of corner profiles. The shearing blades, built for mass production, can be used on both sides (the upper blade has 2 cutting edges, the lower blade has 4 cutting edges). This ensures a clean cut with minimal warping, from the full capacity down to a thickness of only 1/8 inch.

3. Cutting station

This station enables the cutting of large angles with a capacity ranging from 17 3/4 inches to 35 1/2 inches.

4. Shearing station

Standard machines are equipped with blades for cutting round and square metal bars. Thanks to additional equipment, it is possible to cut U-sections, I-section profiles and T-sections. The blades are held by efficient jaws that ensure the equipment can be arranged easily at the machine without any additional adjustment.

5. Notching station

The standard metal notching station is equipped with an adjustable rectangle unit and threading table, enabling repeatable positioning. Additional installations are available for narrow widths or for notching V angles up to 17 3/4 inches. Furthermore, it is possible to acquire units for forming at bar ends and for easy notching tasks.