Ironworker IW 65
Ask for price
Hydraulic ironworker 65 ton 5 stations
- Profile cut
- Angle cut
- Round and Square bar shear
The hydraulic ironworker machine IW 65 has a force of 65 tons. Ironworkers machines are multi-purpose machines for metal working. This ironworker machine has five workstations, allowing punching, notching, profile cutting, angle cutting and shearing of the square and round metal bars. This machine has a single piston that allows one work station to slide manually from left to right . The distance of the piston stroke is adjustable for better productivity. Punching and shearing can be made on both sides by a switch on the electrical switch. The 5 stations are connected to single piston and worked by the foot pedal.
All of our REBEL series ironworkers have high-end components that are well known and available in the North American market.
Ironworker machine 65 ton:
- Punching Ø 1.1” x 5/8” thick (28 x 15 mm)
- Shearing steel solid round Ø 1.18” (30 mm) and square metal bar 0.98” (25 mm)
- Angle cutting 90° : 4.72 x 4.72 x 1/2“ (120 x 120 x 12 mm)
- Profile cutting up to 7.87” for a flat bar of thickness 3/4″ and up to 3,15” a profile with an angle of 3/8” thick.
- U Notching 3/8”
Thanks to additional equipment, it is possible to cut U-sections, I-section profiles and T-sections. The blades are held by efficient jaws that ensure the equipment can be arranged easily at the machine without any additional adjustment.
How to work the ironworker machine IW 65
1. Punching station
All metal punching operations are processed by means of hydraulic power, thus giving the machine the ability to punch very efficiently and silently. The machine can either be used to punch thick metal or thin materials layered together. Punching is silent, powerful, and efficient. The waste materials come off together and in layers. The punching table consists of two parts: the first is the punching flange; the second is the holder. The holder is a device that prevents the material from coming back with the punch after cutting. There are different holders for different materials.
2. Shearing station
The metal shear station has been equipped with simple and sturdy fixing mechanisms that can be adjusted for any steel thickness depending on the cutting capacity of the machine. The shearing capacity can go up to 17.71 inches in the flat bar or the cutting of corner profiles. The shearing blades, built for mass production, can be used on both sides (the upper blade has 2 cutting edges, the lower blade has 4 cutting edges). This ensures a clean cut with minimal warping, from the full capacity down to a thickness of only 1/8 inch.
3. Cutting station
This station enables the cutting of large angles with a capacity ranging from 17 3/4 inches to 35 1/2 inches.
4. Profile cutting station
Standard machines are equipped with blades for cutting round and square metal bars. Thanks to additional equipment, it is possible to cut U-sections, I-section profiles and T-sections. The blades are held by efficient jaws that ensure the equipment can be arranged easily at the machine without any additional adjustment.
5. Notching station
The standard metal notching station is equipped with an adjustable rectangle unit and threading table, enabling repeatable positioning. Additional installations are available for narrow widths or for notching V angles up to 17 3/4 inches. Furthermore, it is possible to acquire units for forming at bar ends and for easy notching tasks.
|Dimensions||59.85 × 37.40 × 70.08 in|
|Main motor power|
|Max bending force|
|Punching - Diameter x max. Thickness|
|Punching - Maximum Diameter|
|Punching - Stroke|
|Punching - Throat depth|
|Punching - Worktable height|
|Shearing round bar|
|Shearing square bar|
|Angle shear 90°|
|Angle shear 45°|
|Angle shear - Worktable height|
|Profile shear - Flat bar|
|Profile shear - Shearing with angle|
|Profile shear - Blade length|
|Profile shear - Worktable height|
|Notching - Thickness|
|Notching - Width|
|Notching - Depth|
|Notching - Worktable height|